Archive for the ‘Help’ Category

MPEG-4 Streaming Issues

Tuesday, January 16th, 2007

We have had reports from users that they are unable to watch the MPEG-4 video on Folkstreams. If you cannot watch the MPEG-4 version of our video, please post a comment here. You will need to register to post a comment. (You may also use our contact form link at the bottom of every page.)

Please tell us:

* The title of the film you were watching.
* Operating System (Apple OX 10, Windows XP, etc.)
* Media Player (Real, Quicktime, etc.)
* Internet Access (Dialup, Broadband)
* Web Browser

Thank you,

Folkstreamer

Folkstreams Video Questions

Tuesday, November 29th, 2005

What media player should I use?

Folkstreams films are streamed using the Real Video format. Excerpts of films are provided in Quicktime format to provide an opportunity for visitors to view a high quality stream even if they have a low bandwidth connection. Folkstreams only supports the Real and Quicktime players.

I have cable/DSL broadband but video is poor quality.

If you move from dialup to broadband and your streaming image quality does not improve, you may have neglected to tell Real Player about your new bandwidth. Like most Real Player users, I assumed that with modern adaptive streaming technology (Sure Stream), the player would adapt automatically to my faster connection. However, this is currently (Real Player 6.0) not the case.

Although Real Player will attempt to negotiate a higher bandwidth stream, it appears that it retains the “decoder” best suited to 56K dialup bandwidth resulting in poor image quality. The image quality is about the same at broadband speeds as it is with 56K dialup. This is why it is important to update your Realy Player “Connection” setting to the correct bandwidth when changing connections.

When there is a mismatch between the bandwidth available and the connection setting, you will notice slowing, jerkiness, blockiness, blurriness and motion breakup in the video. Restarting the stream after making changes to the Connection settings in Real Player will result in a crystal clear broadband image.

To be sure your Real Player is correctly configured after moving from dialup to broadband (or when increasing bandwidth, such as moving from a lower speed service to a higher speed service):

1. Go to the toolbar in Real Player. Select the Tools menu.
2. Select Preferences from the menu.
3. Locate the Connection entry in the preferences. Select it.
4. The Bandwidth section contains settings for Normal bandwidth and Maximum bandwidth.
5. Open the pull down menu, select the setting that most closely matches your new broadband connection. Be sure to check with your provider to know what speed your connection is. Many High Speed Internet cable providers are at 1.5Mbps and moving rapidly to 3Mbps connections, so you would want to select DSL/Cable (400 Kbps and above) at minimum if you have such a connection.

The Connection setting in Real Player can easily be misread. It has two settings, which look at first like minimum and maximum bandwidth. But in reality, one is the “normal” bandwidth and the other maximum. “Normal” is actually the desired bandwidth.

(Please note the instructions are for RealPlayer 6.0, you may have to look somewhere else in your settings.)

How do I make screenshots or capture screen images?

To make a screenshot on the PC using Windows. hit the Print Screen key. If you have trouble making a screenshot, see the instructions below.

RealOne Player:

1. In RealOne Player, click the Tools menu and choose Preferences.
2. In the Category panel, click Hardware.
3. On the Hardware panel, click to clear the Use Optimized Video box.
4. Click OK.
5. Exit and then restart RealOne Player.

Now hit Alt and Print Screen to take the screen shot.

How do I test my broadband connection speed?

There are several websites where you can test the speed of a broadband connection. Some charge a fee, but TestMy.net currently offers a free test. Choose the Download test to find out how fast your connection is for streaming from our site.

Folkstreams Newsfeed

Sunday, March 20th, 2005

You can keep up with Folkstreams by connecting to our newsfeed. Using a news reader, you can get a live feed of recent films as they are added to Folkstreams catalog.

You will need software or an online service to read our news. Sometimes the software is called a ‘newsreader’ or ‘headline’ reader, and the services are called ‘aggregators’ but they all read RSS (Real Simple Syndication) news and present it to you.

You will need some software or an online service to read our news feed.

Personal RSS Readers

A personal reader is software you download to install on your personal computer for reading news.

An example is AmphetaDesk (http://www.disobey.com/amphetadesk/) a personal news aggregator that sits on your desktop. (Available for Mac/Win/Linux).

If you have the FireFox web browser, you can simply click the RSS icon to add our feed to your Live Bookmarks.

Online News Services

There are services that enable you to read news feeds online from a web site.

Free news readers and news reading services.